The trailer pump adopts axial recirculation and external mixing, and has a unique design of the pump body and impeller flow passage. It can be used as a general self priming pump without the need to install a bottom valve and irrigation water, and can also absorb large solids and long fibers. Impurity liquid, widely used in flood control and drought relief, municipal sewage discharge, emergency drainage and other fields.
Trailer pump use:
(1) Widely used in maintenance of water company. (The water pipe suddenly bursts, causing water to build up or replacing the water pipe.
(2) Factory, residential area. (The accumulation of water caused by the accumulation of water in the residential area or the blockage of the drainage wells due to the onset of the rainy season and the accumulation of water pipes).
(3) Underground garage drainage. (The rainy season comes to the garage to enter the water, need to drain in time).
(4) Urban water accumulation (the water needs to be drained in the city during the rainy season).
(5) Water accumulated in the expressway or accumulated in the tunnel.
(6) Drought resistance, extraction of water from rivers or lakes.
(7) Groundwater can also be pumped to supply water for areas with abundant groundwater.
Advantages:
(1) Easy to operate; flexible; fast.
(2) For residential areas that are inconvenient to enter and exit large repair vehicles.
(3) Basically, the sewage can be drained clean.
(4) Open impeller, in the case of mud, particles and other impurities will not block.
(5) For sewage pumps, the lift is higher and it is more suitable for water supply in mountainous areas.
(6) The built-in wear plate prevents friction from directly coming to the pump after the impeller is stuck or entangled. It is only necessary to replace the wear plate to reduce the maintenance cost.
(7) The pump can work quickly and well regardless of whether there is air in the suction pipe. (Because the vacuum pump and the pump work at the same time, if the inlet pipe is slightly damaged or the seal is not good, the pump can always draw water. This is not the case for many similar products).
(8) Convenient and quick, it can be drained to the site within 15-50 seconds. In the early stage, it is not necessary to fill the pump casing with a suction distance of 9 meters.
Trailer pump use:
(1) Widely used in maintenance of water company. (The water pipe suddenly bursts, causing water to build up or replacing the water pipe.
(2) Factory, residential area. (The accumulation of water caused by the accumulation of water in the residential area or the blockage of the drainage wells due to the onset of the rainy season and the accumulation of water pipes).
(3) Underground garage drainage. (The rainy season comes to the garage to enter the water, need to drain in time).
(4) Urban water accumulation (the water needs to be drained in the city during the rainy season).
(5) Water accumulated in the expressway or accumulated in the tunnel.
(6) Drought resistance, extraction of water from rivers or lakes.
(7) Groundwater can also be pumped to supply water for areas with abundant groundwater.
Advantages:
(1) Easy to operate; flexible; fast.
(2) For residential areas that are inconvenient to enter and exit large repair vehicles.
(3) Basically, the sewage can be drained clean.
(4) Open impeller, in the case of mud, particles and other impurities will not block.
(5) For sewage pumps, the lift is higher and it is more suitable for water supply in mountainous areas.
(6) The built-in wear plate prevents friction from directly coming to the pump after the impeller is stuck or entangled. It is only necessary to replace the wear plate to reduce the maintenance cost.
(7) The pump can work quickly and well regardless of whether there is air in the suction pipe. (Because the vacuum pump and the pump work at the same time, if the inlet pipe is slightly damaged or the seal is not good, the pump can always draw water. This is not the case for many similar products).
(8) Convenient and quick, it can be drained to the site within 15-50 seconds. In the early stage, it is not necessary to fill the pump casing with a suction distance of 9 meters.
