The mobile drainage pump is designed and produced on the basis of the technology of digesting and absorbing submersible flow pump for flood prevention and rescue, drought relief and other special dangers. The pump has made breakthroughs in weight reduction, over-current capability and reliability. The maximum weight of single-unit equipment is less than 390kg. It is flexible and flexible. The pump is coaxial with the motor. It is compact and easy to maintain. It can be submerged in water. Compared with traditional water pumps, it has obvious advantages in terms of speed, energy saving and environmental protection.

The self-priming diesel water pump unit used in the mobile pumping pump is a novel structure developed on the basis of repeated research on similar technologies at home and abroad. The pump set integrates self-priming and non-blocking sewage discharge, adopts diesel engine to drive axial recirculation and external mixing, and adopts the unique design of pump body and impeller flow passage. It does not need to install bottom valve and irrigation water when using.

The mobile pumping and pumping pump unit can absorb and contain large particle solids and long fiber impurity liquid, and can be widely applied to municipal sewage and flood control projects, agricultural irrigation and the like. The pump set has the characteristics of simple structure, good self-priming performance, strong sewage discharge capacity, high efficiency and energy saving, convenient use and maintenance, integrated or outdoor movable design.

How to operate the mobile pumping truck:

1. Check if the diesel engine oil, diesel oil, water or antifreeze is normal, and the battery voltage is normal. 24-25v

2. Is the water inlet connector sealed and airtight, and the drain valve closed?

3. After everything is normal, you can start it. This machine is divided into two startup modes: manual and controller startup. Manual startup is used as a backup.

4. The pump is used for the first time, the pump body is waterless, and the vacuum assist function of the diesel engine can be utilized. The vacuum water tank needs to have water to supply water to the vacuum pump for normal use. Before use, open the vacuum pump inlet and exhaust valve to the exhaust water to the exhaust The pump body, when the vacuum pump drains a large amount from the water tank, the water has entered the pump body.